How to Use an Air Compressor for Tires?

Getting a flat tire when you want to go somewhere important can be the worst thing ever happened to you. For readily fixing the tire, maintaining air pressure is needed which can only be possible with an air compressor. But not only having the air compressor within your reach is important, you should also know how to use an air compressor for tires.

How to Use an Air Compressor for Tires

Air compressor can maintain the correct pressure of the gas and ensure that your tire is completely secured from bursting. Moreover, you can In this blog, we’ll be mentioning the correct way of using an air compressor for tires.

Know the Air Compressor Features

Although it is quite easy to know about the mechanics of the features, you’re using an air compressor, yet some people tend to forget the usage. Knowing it is important or else you’ll have hindrances in working safely and efficiently for inflating the tires.

The tire chuck or hose is used to connect the air valve of the tire to the compressor ‘s air filling nozzles. Next, there is a regulator that circulates that air and its pressure, reaching the tire. Lastly, the pressure gauge is needed for making sure that the pressure balance of the tire is maintained.

Know the Air Compressor Features

Be Aware of Tire Pressure

Before proceeding, it’s crucial to know how much air pressure each tire requires. This can vary greatly from vehicle to vehicle. There is a rule of thumb for construction vehicles, that is at least 100 pounds per square inch for each tire.

The best way to know the accurate amount of PSI required is to simply check the vehicle’s owner’s manual which will have the required amount.

Prep the Tire

Before the air compressor can be used, there is a stem cap you have to remove from the valve stem. The stem cap is small and it’s easy to lose it if there is a lot of stuff around, so make sure to keep it somewhere where it will not be misplaced.

Prep the Tire

Lay down your tire on its side and keep the compressor ready because as soon as the cap is removed, some of the air will escape.

Switch on the compressor

Most air compressors on the market will be using electricity as their main source of power. If your compressor is a large boy, it will have a three-prong plug, while smaller units will come with only two. Before you are tempted to simply plug the compressor in, make sure the outlets are supplying the right voltage as using it on the wrong voltage can come with disastrous results such as a blown circuit, or even worse a blown compressor. Plug-in the processor and listen for the motor to start.

Switch on the compressor

The compressor should be as close to the tire as possible. Some compressors have tires built-in which can make it super easy to move around. Pick up your quick coupler and include it at the end of your hose while attaching it to the compressor. Then attached the hose to the valve stem. Once everything is properly secured, you can start the machine.

Remove the Hose

It is essential to keep a look at the pressure while the tire is filling up. In most advanced air compressors, there are digital trackers that can maintain the pressure and automatically turn off when the device reaches maximum or any specified pressure. If excessive air is added from the compressor, the air would be released resulting in leakage.

Remove the Hose

Finally, when you get the tire all puffed up, it is time to remove the hose from the air compressor and don’t worry when you hear the hissing sound from the piece when you detach as it’s completely safe.


As we have reached the end of the blog, you might be having some queries related to the topic. A few of them are answered below:

Why is ideal tire pressure needed?

It is necessary to maintain an ideal tire pressure because it won’t let it burst too easily being lighter on your pocket and also it keeps you away from any long-term difficulties. That’s why an air compressor is recommended to fill up as it monitors the pressure needed for tires.

Does the tire have different pressure ranges for different seasons?

Yes, the pressure in the tires depends on the seasons, specifically heat in the environment. So, for summers, the perfect pressure for tires can be about 30 PSI. While, in winter it stretches to a maximum of 35 PSI. If the temperature decreases then the pressure increases.


People often get afraid of having a flat tire in any critical situation, while that can frustrate you but as soon as you have an air compressor you don’t have to worry. There are some basic steps that you need to perform until your tire is completely inflated.

Using an air compressor seems to be a difficult task but with the help of digital controls and output details you can figure out the mechanics quickly so that it can work efficiently.

Leave a Reply

Your email address will not be published. Required fields are marked *